Now Available From Our UK Distribution Centre With Full Telephone Tech Support! Call 0151 440 3358
AUDI
E-Tron GE GT FW
Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
THIS DEVICE IS COMPATIBLE WITH ALL AUDI E-TRON MODELS RELEASED FROM 2018 - 2025

 

  • 2018 – 2025 Models
  • 100% Untraceable
  • Plug-And-Play Module
  • With Working Speedometer
  • Available SKF Bluetooth App 
  • Available With long cable 
  • 12 Months Warranty
  • Express FedEx Shipping Available
  • Nationwide Fitting Available (UK ONLY)
Clear

⚠️ Warning ⚠️

Mileage Protection for Dyno TestingThe module allows for professional performance and dyno testing without increasing the vehicle’s recorded mileage. It is ideal for tuning workshops, dynos, and motorsport professionals. The module functions similarly to the dyno mode found in Xentry, ODIS, or ISTA, disabling the odometer during test drives without affecting other vehicle systems.

 

:warning: Important Notice: The module is strictly intended for testing on closed tracks or test benches. It is not approved for use on public roads. The seller accepts no responsibility for improper use or any legal consequences arising from misuse. The module can be safely deactivated at any time without leaving any trace.

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

AUDI E-Tron GE GT FW MILEAGE BLOCKER

AUDI E-Tron GE GT FW Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS COMPATIBLE WITH ALL AUDI E-TRON MODELS
RELEASED FROM 2018 - 2025

Installation Videos

SPECIFICATIONS

  • Mating face and Ridges on the connector guarantee a smooth installation process
  • Comes with premium-quality plugs and heat-resistant cables
  • The span won’t increase spontaneously after removal
  • It can be activated by pressing a button on the steering wheel
  • The ability to purchase with or without an app
  • The diagnostic testers cannot discover the mileage altered by Audi E-Tron GE GT FW Mileage Stopper
  • Select settings once and they will be saved unconditionally
  • Speedometer and all the other assistance systems work flawlessly
  • Easy DIY installation, not requiring any in-depth knowledge of vehicles
  • No soldering or cutting of cables required
  • No error messages displayed on the speedometer or navigation panel
  • Has multiple modes to choose from
  • As soon as this device is activated, the engine control light can appear on vehicles from the end of 2020
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

Please read that

If your vehicle has recently received an update from the manufacturer, the previous activation method will not be applicable anymore. Only mode one (full stop) and mode four (full count) will work. To activate the module, you must switch off the vehicle completely five times in a row. After the purchase, you will receive a PDF file with further details.

ACTIVATION & DEACTIVATION

Change modes via our smartphone app or press the OK button for 10 seconds.

Repeat the process to switch from mode to mode.

Compared to the previous Mileage Blocker module, the current one has 4 modes. The actual speed is permanently displayed in every mode, both in the speedometer and in the head-up display.

The module is always pre-activated in MODE 1 / ON

Mode 1
The mileage is 100% stopped

After activating mode 1, the vehicle must be switched off for 3 minutes. Only then is MODE 1 activated.

Mode 2
Only 5% of the actual mileage is recorded

Mode 3
Only 10% of the actual mileage is recorded

Mode 4
The mileage is 100% counted

Audi E-Tron GE GT FW Mileage Blocker tool always keeps previously applied settings. So that you don’t need to change the settings each time.

The device can be activated or deactivated, either while in motion or when stationary.

What is the Audi E-Tron Mileage Blocker or Mileage Correction Tool?

The Audi E-Tron Mileage Blocker/Odometer Blocker is designed to prevent the accumulation of unnecessary mileage during performance testing. At Super Kilometer Filter, we provide high-quality modules made with genuine components. Our wide selection of Mileage Stopper devices is suitable for various vehicles, and they work efficiently whether your odometer measures in miles or kilometres. Each device is programmed specifically for your vehicle’s make and model to ensure flawless performance. Simply install the module and switch between modes using pre-set key combinations.

We do not offer Mileage Correction tools for the Audi E-Tron, as they are intended for dishonest purposes, such as removing mileage data from odometers. These tools often attempt to roll back the distance travelled, but vehicles store data in multiple units, making such tools ineffective at reversing mileage completely.

Installation is quick and easy, requiring no advanced mechanical knowledge. Simply plug the module between the instrument cluster and the original cable.

The Audi Mileage Blocker can be activated or deactivated anytime, whether the car is in motion or stationery.

The Mileage Blocker tool works perfectly on a diesel-gasoline engine, as well as, Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars.

Explore our range of Mileage Stopper devices for Audi vehicles and enjoy the benefits of a reliable, undetectable solution.

FAQ

The Mileage Blocker effectively stops the mileage from increasing, and the recorded figures will remain unchanged even after the module is removed. You can confidently use our Mileage Blocker to prevent mileage accumulation and remove it at any time. Once stopped, the mileage won’t increase spontaneously after the module is taken out. However, in some cases, it's advisable to clear any error messages that might appear after removal. CAN communication systems may occasionally log brief interruptions as errors. While these are rare and don’t always require deletion, it's recommended to clear them for optimal performance.
Yes, you can control the module either using the buttons on the steering wheel or through your smartphone.
Yes, you can control the module either using the buttons on the steering wheel or through your smartphone.

Bug fixed

The check engine light will no longer light up due to our device.

On many vehicles from the end of 2020, the check engine light would go on and off after a certain amount of time, this process would then repeat itself at regular intervals. This is now fixed.

Additional information

Weight 100 g
Pin connector of your car

18 Pin, 32 Pin

Cable length

Long cable, Short cable

App compatibility

With App, Without App

Reviews

There are no reviews yet.

Be the first to review “Audi E-Tron Mileage Blocker GE GT FW 2018 – 2025”

Your email address will not be published. Required fields are marked *

Make Model Year
Audi E-Tron GE GT FW 2018 - 2026

Related products

Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support