Infiniti QX80 Mileage Blocker 2024 – 2026
Infiniti QX80 Mileage Blocker 2024 – 2026
£ 699.00
- 2024 – 2026 Models
- 100% Untraceable
- Plug-And-Play Module
- Remains permanently in the car
- With Working Speedometer
- 12 Months Warranty
- Express FedEx Shipping Available
£ 699.00
Delivery (1-3 business days)
Share us:
-
Fast removeNot available
-
Original plug
-
Speed indicator
-
AppNot available
-
Driving assistant
⚠️ Warning ⚠️
Mileage Protection for Dyno Testing The module allows for professional performance and dyno testing without increasing the vehicle’s recorded mileage. It is ideal for tuning workshops, dynos, and motorsport professionals. The module functions similarly to the dyno mode found in Xentry, ODIS, or ISTA, disabling the odometer during test drives without affecting other vehicle systems.
Important Notice: The module is strictly intended for testing on closed tracks or test benches. It is not approved for use on public roads. The seller accepts no responsibility for improper use or any legal consequences arising from misuse. The module can be safely deactivated at any time without leaving any trace.
Attention
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
INFINITI QX80 MILEAGE BLOCKER
THIS DEVICE IS COMPATIBLE WITH ALL INFINITI QX80 MODELS RELEASED FROM 2024 - 2026
Installation Videos
SPECIFICATIONS
- Installation is very complicated
- Two devices are always sold, one is for the OBD2 connector and the second is the Speedometer
- Remains permanently in the car
- Soldering and cutting of cables require
- Plug-and-play version and soldering required
- Installation requires specialized personnel in accordance with the instructions
- Everything works as usual
- The diagnostic testers cannot discover the mileage altered by Infiniti QX80 Mileage Blocker
- Select settings once and save them unconditionally
- Turn on and off while in motion
- Easy to operate with key combinations
- No error messages appear on the speedometer or navigation panel
ATTENTION! VERY IMPORTANT!
Two devices are always sold, one for the OBD2 connection and the second is the speedometer.
The component behind the speedometer must remain permanently installed in the car. If the module is removed and the speedometer is then reconnected to the original connector, the speedometer synchronizes with the ABS, which restores the reset miles. It is advisable to solder the circuit board of the super kilometer filter into the wiring harness to the speedometer to prevent unintentional removal. Observe all relevant safety and legal regulations. And the vehicle manufacturer’s installation and warranty instructions must be observed.
Before installation, the battery should be disconnected and some preparation is required. Both devices must be installed in the OBD2 connection and behind the speedometer.
The plug-and-play version is only available for the mileage blocker and is easy to install, but must remain permanently in the car. The module for the OBD2 port must be soldered there is no other option.
The installation is very complicated and requires experience with car electronics and special tools. Beginners could damage the car.
Superkilometerfilter.com accepts no liability for damage caused by improper use.
ACTIVATION & DEACTIVATION
Pull the high beam lever 5 times
The hazard warning lights flash briefly according to the currently selected mode: Mode 1 = 1x flashing, Mode 2 = 2x flashing.
Repeat the same process to switch from mode to mode.
These devices must be permanently installed in the vehicle (preferably soldered into the wiring harness) and cannot be removed after use.
The module is always pre-activated in MODE 1 / ON
Mode 1
0% of the actual mileage is recorded
Mode 2
100% of the actual mileage is recorded
Deactivate the module forever
Attention, this cannot be undone. Completely off, after which you can never switch the device on again.
INFINITI QX80 Mileage Blocker tool always keeps previously applied settings. For that reason, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
Additional information
| Weight | 100 g |
|---|
| Make | Model | Year |
|---|---|---|
| Infiniti | QX80 | 2024 - 2026 |
Stuck on fitting? Talk to the people who built it.
WhatsApp, phone or email, 24/7. Fitting videos for every module.
Reviews
There are no reviews yet.