Toyota Hilux AN1P (8th Gen. Facelift) Mileage Blocker 2020 – 2025
Toyota Hilux AN1P (8th Gen. Facelift) Mileage Blocker 2020 – 2025
£ 499.00
- 2020 – 2025 Models
- 100% Untraceable
- Plug-And-Play Module
- With Working Speedometer
- 12 Months Warranty
- Express Shipping Available
- Nationwide Fitting Available (UK ONLY)
£ 499.00
Delivery (1-3 business days)
Share us:
 Mileage Blocker 2020 - 2025)
-
Fast remove
-
Original plug
-
Speed indicator
-
App
-
Driving assistant
⚠️ Warning ⚠️
Mileage Protection for Dyno Testing The module allows for professional performance and dyno testing without increasing the vehicle’s recorded mileage. It is ideal for tuning workshops, dynos, and motorsport professionals. The module functions similarly to the dyno mode found in Xentry, ODIS, or ISTA, disabling the odometer during test drives without affecting other vehicle systems.
Important Notice: The module is strictly intended for testing on closed tracks or test benches. It is not approved for use on public roads. The seller accepts no responsibility for improper use or any legal consequences arising from misuse. The module can be safely deactivated at any time without leaving any trace.
Attention
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Toyota HILUX AN1P (8TH GEN. FACELIFT) MILEAGE BLOCKER
THIS DEVICE IS COMPATIBLE WITH ALL TOYOTA HILUX AN1P (8TH GEN. FACELIFT) MODELS RELEASED FROM 2020 - 2025
Installation Videos
SPECIFICATIONS
For the mode that stops the mileage entirely, we allow a deviation of up to 1% of the distance driven. Details about stopped mileage are approximations, and there may be minor differences.
- Easy DIY installation instruction
- Installation takes only up to an hour
- High-quality plugs and heat-resistant cables
- Doesn’t leave a trace after removal
- No soldering or cutting of cables required
- Can be activated and deactivated while in motion
- After detachment, the mileage doesn’t increase spontaneously
- The diagnostic testers cannot find out if the mileage was altered by the Toyota Hilux AN1P (8th Gen. Facelift) Mileage Blocker
- Selected settings will be saved unconditionally
- Mating face and ridges on the connector guarantee a smooth installation process
- All assistance systems including the speedometer work flawlessly
- No error messages shown on the speedometer or navigation panel
ACTIVATION & DEACTIVATION
The activation/deactivation method depends on whether your Toyota has Cruise Control or not:
Pull the Cruise Control lever (on the right, under the steering wheel) towards you for 4 seconds
OR press and hold the CANCEL button for 10 seconds
OR pull the high beam lever 4 times
OR change modes via the SKF smartphone app
The module is always pre-activated in MODE 1 / ON
ON
The miles are stopped at 100%. Once the module is activated, the message “Driver’s door open” appears briefly.
OFF
The miles are counted at 100%. Once the module is deactivated, the message “Passenger door open” appears briefly.
The Toyota Hilux AN1P (8th Gen. Facelift) Mileage Blocker always keeps the last applied settings, so you don’t have to change them before each drive.
The device can be activated or deactivated, either while in motion or when stationary.
Additional information
| Weight | 100 g |
|---|
| Make | Model | Year |
|---|---|---|
| Toyota | Hilux AN1P (8th Gen. Facelift) | 2020 - 2025 |
Stuck on fitting? Talk to the people who built it.
WhatsApp, phone or email, 24/7. Fitting videos for every module.
Reviews
There are no reviews yet.